Developer forum

Hi Kevin,

Could you possibly try and perform a request directly to the endpoint - not using the testapp? What I'm getting at: we need to know if the dealy resides withing the connector, or if it is the response from the endpoint itself that takes longer than it should.

/Snedker

I have made a few requests with Postman, still the same problem - about the same delay on 2 seconds.

First using DW Test APP

ServerGotRequest: 11:53:25.192
ServerBeginResponse: 11:53:27.522
Time spent: ~2.3 sec

First using Postman

ServerGotRequest: 11:55:23.216
ServerBeginResponse: 11:55:25.738
Time spent: ~2.5 sec

Second using Postman

ServerGotRequest: 11:55:42.140
ServerBeginResponse: 11:55:42.218
Time spent: 0.088 sec.

All requests made with the same data request

/Kevin

Hi Kevin,

I have received examples of setting up Postman to communicate directly with the endpoint (see attached). Could I have you try that out? That should give some indication whether or not the connector is the problem.

/Snedker

I can't get postman to authenticate agains the NAV Webservice endpoint.

I can authenticate with the credentials if I access the service in a browser.

What could I be doing wrong? Is the NTML Authentication [BETA] really beta so that it can't Negotiate?

Hi Kevin,
you can check what type of Authorization your NAV server is used by opening the NAV server administration tool and check the authentication drop-down selected value.
But also you can try different methods of authorization in Postman. Try Basic Auth with username and password fields.

Regards, Dmitrij