Developer forum

Hi Aki,

It should be the same Pattern's rules, as you can use/define on Image-Patterns, so look into that documentation (screendump attached below)

So as described, you can define two Patterns, and with Manufacturer you should use "{ProductManufacturer}"

Link to documtation are Product Images (dynamicweb.com)

/Søren

Screendump:

Hello Aki,

- I would say both you're requests should be possible + the pattern seems correct.  If it don't work, what version are you running on + how is the Auto checkin job settings?

From one of my working solutions:
*{ProductNumber}-*;*{ProductGroup}-*

Br. Michael Knudsen

Hi Michael,

I have to warn you about above "Pattern example"

ONLY USE "*" at the end of a Parameter-rule, otherwise it can make a werry bad performance on you solution

So NEVER use it in front of the Parameter, as shown above ..

/Søren

Thanks Soren and Michel for your input. 

Seems like  was on the right track. I have changed my pattern to :

{ProductId}_Manual*;{ProductManufacturer}_Manual*;

I have a file named "Hilti_Manual-pdf" and a manufacturer named "Hilti" but it wont "checkin" that file to the asset. The {ProductId} part work and the file named accordingly got checked in. 

For testing puposes I also tries to create a new AssetCategory just for Manufacurers with the pattern {ProductManufacturer}_Manual* but that did not either.

Could there be a problem with the {ProductManufacturer} ?

Regards / Aki 

Hello Aki,

- please submit a image of your Scheduled task similar to the one I have attached below.

Hi,

Here comes. 

The asset category called "Dokument - Manual" is the one I'm trying to add manufacturers to. 

Hello Aki,

- everything seems to be correct, so unless you have forgotten to select pdf as file extension on the Asset category, I don't know what to do.

Br. Michael Knudsen

Do you have it working with the {ProductManufacturer} tag?

/Aki

Hi Aki,

I have invistigated the above parameter, named "ProductManufacturer" ..

"ProductManufacturer" are not supported in the new Pattern-rules, there also are used for CheckIn tool. So that is why you can't get it to work..

It should be possible to add it to the " ImagePatternExtenderBase Class", and otherwise you can add a seperat CustomerField to store the information ..

I hope this helps you

/Søren